Freetronics USBHost

Copyright 2011 Freetronics Pty Ltd
Freetronics site: <www.freetronics.com>
Freetronics email: info@freetronics.com

The USBDroid is a 100% Arduino Compatible Board, based on the existing Uno, but with improvements and updates for ease of use, cost and getting started. It also includes on-board USB host functionality using a dedicated port.

Features:

• Mini-USB connector
• Integrated USB host functionality on a dedicated USB connector
• Overlay guide where you need it (both top and bottom)
• D13 pin works for everything
• RX pin biased
• Mounting holes, power and X3 pads
• All connections in the same place

You can view more at our product page at:

http://www.freetronics.com/usbdroid

The "docs" folder within this repository includes a handy copy of the schematic in PDF format, images of the pcb, and our Getting Started guide that ships with each board.

INSTALLATION

The design is saved as an EAGLE project. EAGLE PCB design software is available from www.cadsoftusa.com free for non-commercial use. To use this project download it and place the directory containing these files into the "eagle" directory on your computer. Then open EAGLE and navigate to Projects -> eagle -> USBHost.

DISTRIBUTION

The specific terms of distribution of this project are governed by the license referenced below.

LICENSE

This work is licensed under the Creative Commons Attribution-Share Alike License.
To view a copy of this license, visit

http://creativecommons.org/licenses/by-sa/3.0/
http://creativecommons.org/licenses/by-sa/3.0/legalcode

or send a letter to

Creative Commons
171 Second Street, Suite 300
San Francisco
California, 94105
USA

The "license" folder within this repository also contains copies of the licences referenced above.

CREDITS

The USBHost was designed by Marc Alexander (marc@freetronics.com).